The Outfitter II features the same performance and design as our Hunter II with a lighter profile. The Tire Tread outsole provides good traction and tends to leave the muck and mud outside while also making this boot lighter weight. Easily fits into standard stirrups and the removable handmade Thinsulate™ liner provides protection from cold temperatures.
- Tire Tread outsole
- 6oz oil tanned top grain leather
- 100% milled brass hardware
- Removable 400g liner
- Comfort rated 0°F Inactive to -20°F Active
- 4.6lbs (10” size 10)
- Handcrafted in Bozeman, MT
Our Pac boots come in whole sizes only and do not come in half sizes. All of our sizing true to size and is based off the brannock device, which is the metal foot measuring device in most shoe stores or footwear departments. If you do wear a half size, we recommend going up to the next whole size. For example, if you wear a 10.5 normally, then we recommend going up to a size 11.
Caring For Your New Pac Boots
We recommend using Pitch Blend on our Pac Boots at least twice a year, prior to your hunting season and afterwards if you're going to store the boots until next year, and as needed throughout the year especially if you have been hunting in wet conditions.
We recommend using leather conditioners and/or oils on our Pac Boots after you've confirmed they fit and you're ready to begin breaking them in, this will help soften the leather upper and expedite the break in process. We also suggest reapplying as needed throughout the lifetime of the boots as the leather begins to dry out and/or stiffen up.
Converting From Men's Size To Women's
There is an approximate 1.5 size difference between Men's and Women's sizing.
A men's size 7 is roughly equivalent to a women's size 8.5. Since our Pac Boots only come in whole sizes, in this case we would recommend going with a women's size 9.